Blur Smooth & Moisturize

By: TOM BRANNA

Editor

Ingredients

%

Phase A

Deionized water
71.94

Disodium EDTA (Ruger) (Disodium EDTA)
0.10

Pemulen TR-1 (Lubrizol) (Acrylates/C10-30 alkyl acrylate crosspolymer)
0.11

Liponic EG-1 (Lipo Chemicals) (Glycereth-26)
1.50

Phase B

Lipomulse Luxe (Lipo Chemicals) (Cetearyl alcohol (and) glyceryl stearate (and) PEG-40 stearate (and) ceteareth-20)
6.00

Liponate TDTM (Lipo Chemicals) (Tridecyl trimellitate)
1.00

Silkflo 364 (Lipo/Ineos) (Hydrogenated polydecene)
2.00

Liponate NEB (Lipo Chemicals) (C12-15 alkyl benzoate)
2.50

Shin-Etsu KSG-16 (Shin-Etsu) (Dimethicone/vinyl dimethicone crosspolymer)
5.00

Liponate NPGC-2 (Lipo Chemicals) (Neopentyl Glycol Dicaprylate/dicaprate)
5.50

Vitamin E Acetate (Ruger) (Tocopheryl acetate)
0.10

Phase C

Sodium Hydroxide Solution 18% (Ruger) (Sodium hydroxide)
0.25

Phase D

Hylasome EG10 (Lipo/Hylamed) (Sodium hyaluronate crosspolymer)
2.00

Phase E

Orgasol 4000 EXD NAT COS Caresse (Lipo/Arkema) (Nylon 6/12)
2.00

Phase F

Preservative
q.s.

Procedure

Combine the water, disodium EDTA and Pemulen TR-1 and mix with high speed propeller agitation while heating to 80°C. When Pemulen is dispersed add remaining sequence #1 ingredients, continue mixing and heating. In a side kettle, combine, sequence #2 ingredients and heat to 80°C. Mix until uniform. Slowly add sequence #2 to sequence #1 and mix with medium propeller agitation for 15 minutes until emulsification is complete. Slowly add sequence #3 to main vessel continue mixing,s tart cooling. Cool batch to 55°C with mixing and slowly add seuqnce #4 then sequence #5. Begin cooling batch further with mixing. Add remaining seuqnce #6 while mixing. Shutdown when batch reaches 32°C.